Filter
Top Products
Starting the recording mode
Howto use the Manualmode
You can manually configure all functions aperture value and shutter
speed.
1. Select the MANUAL mode by rotating the
mode dial.
2. Press the Fn button and menu for the shutter
speed and aperture value will display.
Up / Down button :changes aperture value
Left / Right button : changes shutter speed.
3. Press the Fn button twice and take an image.
Howto usethe DISmode
Digital Image Stabilisation (DIS) mode.
This mode will reduce the effect of camera shake and hetp you get a
well-exposed image in dim conditions.
[] Things to watch out for using the DIS mode
1.The digital zoom will not operate in the
DIS mode.
2. If the lighting condition is brighter than
fluorescent lighting conditions, the DIS will
not activate.
3. If the lighting condition is darker than
influorescent lighting conditions, cam-
era shake warning indicator ( '_p ) will
display. For best results only take pictures
in situations where the camera shake
warning indicator ( '_p ) is not displayed.
4. If the subject is moving, the captured image may be blurred.
5. Avoid moving the camera while the [Capturing!] message is
displayed to achieve a better result.
6. As the DIS uses the camera's digital signal processor, it may take a
little longer for the camera to process and save the images.
7. $860 :If the image size is ([]) or (_) ,the DIS mode can't be selected.
$760 :If the image size is (_) or (_) ,the DIS mode can't be selected.
DIS (Digital Image Stabitisation) function does not operate while the
camera is connected to a TV. Remember to keep the camera steady
when you are taking pictures.
RECORO_NG <i7}