Using the camera buttons to set the camera
The recording mode function can be set up by using the camera buttons.
POWER button
Used for turning the camera's power on / off.
If there is no operation during the specified
time, the camera's power will be turned off
automatically to save battery life.
Refer to page 48 for more information about
the auto power off function.
SHUTTERbutton
Used for taking an image or recording voice inthe RECORDING
mode.
• In MOVIE CLIP mode
Pressing the shutter button down fully starts
the process for recording a movie clip.
Press the shutter button once and the movie
clip is recorded for as long as the available
recording time inthe memory allows. If you
wish to stop recording, press the shutter button again.
• In STILL IMAGE mode
Pressing the shutter button down halfway activates the autofocus and
checks the condition of the flash. Pressing the shutter button down
fully takes and stores the image. If you select voice memo recording,
the recording wilt start after the camera has finished storing the image
data.
ZOOM W / T button
If the menu is not displayed, this button works
as the OPTICAL ZOOM or DiGiTAL ZOOM
button.
This camera has a 3X optical zoom and a 3X
digital zoom function. Using both wilt offer a
total zoom ratio of 9X.
[] TELE Zoom
Optical zoom TELE
Digital zoom TELE
:Pressing the ZOOM T button. This will zoom
into the subject i.e. the subject wilt appear
nearer.
:When the maximum (3X) optical zoom is se-
lected, pressing the ZOOM T button activates
the digital zoom software. Releasing ZOOM
T button stops the digital zooming at the
required setting. Once the maximum digital
zoom (3X) is achieved, pressing the ZOOM T
button wilt have no effect.
[WIDE zoom] [TELE zoom] [Digital zoom 3.0X]
{22} RECORDING