Filter
Top Products
准备
使用手带和镜头盖
开始使用摄像机之前，正确调整手带的位置，这样可以确保:
- 以稳定、舒适的姿势握住DVD摄像机。
- 不需要改变手的位置，便可以按下
[Zoom]变焦，[Start/Stop]按钮。
手带
1. 拉开并松开手带，把手带穿入手带扣。
2. 把手插入手带并调整手带长度。
3. 将手带粘牢。
镜头盖
1. 用镜头盖线连接镜头盖。
2. 拉开并松开手带。
3. 把镜头盖线套在手带上，如上方法调整
手带。
4. 将手带粘牢。
操作后安装镜头盖
按下镜头盖两侧的按钮，然后将它插入，使
它覆盖DVD摄像机的镜头。
Preparation
Using the Hand Strap & Lens Cover
It is very important to ensure that the Hand Strap has been correctly
adjusted before you begin your recording.
The Hand Strap enables you to:
- Hold the DVD Camcorder in a stable, comfortable position.
- Press the
[Zoom] lever and [Start/Stop] button without having to
change the position of your hand.
Hand Strap
1. Pull and open the Hand Strap and
release the Hand Strap.
Insert the Hand Strap into the Hand
Strap Hook.
2. Insert your hand into the Hand Strap
and adjust its length.
3. Close the Hand Strap.
Lens Cover
1. Hook up the Lens Cover with the Lens
Cover Strap as illustrated.
2. Pull and open the Hand Strap and
release the Hand Strap.
3. Hook up the Lens Cover Strap to the
Hand Strap and adjust it following the
steps as described for the Hand Strap.
4. Close the Hand Strap.
Installing the Lens Cover after
Operation
Press buttons on both sides of the Lens
Cover, then insert it so it covers the DVD
Camcorder Lens.
中 文
19
ENGLISH
1
2 3
PHOTO
1 2 4