数码相机模式(仅限SC-DC173(U)/DC175/DC575)
在记忆卡上拍摄(JPEG)的静止图像
可以在照片摄制模式下拍摄静止图像并将图像存储在记忆卡上。
26页
可以使用遥控器拍照。(仅限SC-DC175/DC575)
声音将不随静止图像保存在记忆卡上。
录像前请检查记忆卡上的保护锁定设置。您可能无法在此锁定键设置为锁定时
进行录像。
1. 插入记忆卡。
89页
2. 设置模式
[Mode]键到[CARD]。
3. 设置电源
[Power]键到摄录模式[ (Camera)]。
4. 对被摄物体取景后,完全按下拍照
[PHOTO]键拍照。
拍摄并在数秒内将照片存入记忆卡。
在这段间隔时间内不能拍另一张照片。
在保存图像所需的时间内,液晶显示屏上显示<
照片拍摄>图标。
注意
已保存的照片看起来要比拍照时显示在 LCD 屏幕上的
照片稍大一点。
照片图像以 800x600 或 1152x864(仅限SC-DC575)
格式保存在存储卡中。
可存储静止图像的数量取决于图像质量。
Digital Still Camera Mode (SC-DC173(U)/DC175/DC575 only)
Taking a Photo Image (JPEG) on a Memory Card
You may take photo images while in M.Cam Mode and store the images
on the Memory Card.
page 26
You can take photo images using the remote control. (SC-DC175/DC575
only)
Audio will not be recorded with a photo image on to the Memory Card.
Please check the protection tab setting on your memory card before
recording. You may not be able to record when it is set to lock.
1. Insert the Memory Card.
page 89
2. Set the
[Mode] switch to [CARD].
3. Set the
[Power] switch to [ (Camera)].
4. After framing your subject, fully press the [PHOTO]
button to take the picture.
The picture is taken and saved into the Memory
Card within a few seconds.
Taking another picture within this interval is not
possible.
The <Photo capture> indicator appears during the
time it takes to save the image.
Notes
Saved photo images will appear slightly larger than
what is shown on the LCD screen when the photos
are taken.
Photo images are saved in the Memory Card in an
800x600 or 1152x864 (SC-DC575 only) format.
The number of photo images that can be stored
depends on the quality of the image.
中 文
ENGLISH
94
4
Photo capture