Filter
Top Products
DVD摄像机:基本录像
第一次录制
1. 将电源连接至 DVD摄像机。
21,25 页
（电池组或者是交流电源适配
器）
插入碟片。
41 页
2. 取下镜头盖。
3. 打开 LCD屏幕。
设置模式 [Mode] 开关到光盘
[DISC]。( 仅限 SC-DC173(U)/
DC175/DC575)
设置电源 [Power] 开关到
[ (Camera)]。
确定显示出 < 待机>。
确定你想拍摄的图象出现在
LCD 屏幕或者 取景器上。
确定电池电量水平指示足够使
用到你想要录制的时间。
4. 开始录制，按下
[Start/Stop]键。
LCD 上会出现 <录像
>。
录制模式、录制时间、光盘类型、格式化模式和标
题编号显示在 LCD 屏幕上。
5. 想停止录制，再次按下
[Start/Stop]。
< 待机 >将会在闪烁后在 LCD 屏幕上显示。
如果想继续录制再次按下 [Start/Stop]。将会建
立一个新的标题清单
标题清单数字将不会在待机模式下显示没有。
提示
本 DVD 摄录机有两个 [Start/Stop] 按钮，分别在背面和 LCD 框架上。只
要方便录制，使用这两个按钮中的任一个都可以。
注意
播放标题列表
64 页
在 DVD-R/+RW/+R DL/-RW（视频模式）光盘上可创建多达 253 个标题场景，
在 DVD-RW（VR 模式）上可创建 999 个标题场景。
停止录制之后取下电池，以避免不必要的电量消费。
若电源线 /电池断开连接，或在录像期间停止录像，将会显示一则错误信息，而系
统将会转换至数据恢复模式。
在进行数据恢复的时候，任何功能都不能使用。数据恢复之后系统将转换到待机模式。
Making your First Recording
1. Connect a power source to the DVD Camcorder.
pages 21, 25
(A Battery Pack or a AC Power adapter)
Insert a disc.
page 41
2. Remove the Lens Cover.
3. Open the LCD Screen
Set the [Mode] switch to [DISC].
(SC-DC173(U)/DC175/DC575 only)
Set the [Power] switch to [ (Camera)].
Make sure that <STBY> is displayed.
Make sure the image you want to record appears
on the LCD Screen or Viewfinder.
Make sure the Battery Level indicates that there is
enough remaining power for
your expected recording time.
4. To start recording, press the
[Start/Stop] button.
<REC
> is displayed on the
LCD Screen.
The record mode, recording
time, the disc type, the
format mode, and the title scene number are
displayed on the LCD Screen.
5. To stop recording, press the [Start/Stop] button again.
<STBY> is displayed on the LCD screen after
blinking.
If you press the [Start/Stop] button to record
again, a new title scene will be created.
The title scene number will not appear in the STBY
mode but in the REC mode.
Tip
This DVD Camcorder has two [Start/Stop] buttons
on both the rear and LCD frame. Use any of those for
convenient recording.
Notes
Playing title scenes.
page 64
Up to 253 title scenes can be created on DVD-R/+RW/+R DL/-RW(Video
Mode)discs, and up to 999 on DVD-RW(VR Mode).
Detach the Battery Pack when you have finished recording to prevent
unnecessary battery power consumption.
If the power cable/batteries are disconnected, or recording is disabled during
recording, an error message will appear and the system is switched to the
data recovery mode.
While data is being recovered, no other function is enabled. After data
recovery, the system will be switched to the STBY mode
.
DVD Camcorder: Basic Recording
ENGLISH
44
中 文
REC
30 min
SP
-
RW
VR
0:00:20
001
16:9 Wide
PHOT
O
3
4
5
4
5
2
1
AD68-01230F_us_sc_2.indd 44 2007-04-19 ¿ÀÀü 10:22:10