Filter
Top Products
设置文件编号（文件号）
只有在照片摄制模式下才能使用文件编号功能。
26页
当在记忆卡上存储静止图像时，为了保存而给图像加上了文件编号。
存储文件编号可设定如下。
- 连续: 当已有文件时，则按顺序以下一个编号为新图像命名。
- 重置: 当记忆卡上没有存储文件时从0001开始给文件编号。
1. 设置模式[Mode]键到[CARD]。
2. 设置电源
[Power]键到摄录模式[ (Camera)]。
3. 按下菜单
[MENU]键。
显示菜单列表。
4. 向上或向下移动[Joystick]选择<存储器>，然后按下摇
杆[Joystick]确认。
5. 向上或向下移动
[Joystick]选择<文件号>，然后按下摇
杆[Joystick]确认。
6. 向上或向下移动
[Joystick]选择所需选项（连续或重
置），然后按下摇杆[Joystick]确认。
显示所选项。
7. 如欲退出，按下[MENU]键。
注意
当将 文件号设置为 连续时，会给每个文件指定一个不
同的号码以避免文件名重复。
如果想要在计算机上管理文件，这样就会非常方便。
数码相机模式(仅限SC-DC173(U)/DC175/DC575)
Digital Still Camera Mode (SC-DC173(U)/DC175/DC575 only)
Setting the File Number (File No.)
File Number setting works only in M.Cam Mode.
page 26
File Numbers are given to images in the order they were recorded when
they are stored on the Memory Card.
File numbers may be set as follows:
- Series: When there are existing files, the new image will be named as
the next number in the sequence.
- Reset: When there are no files stored on the Memory Card, the file
numbering starts from 0001.
1. Set the
[Mode] switch to [CARD].
2. Set the
[Power] switch to [ (Camera)].
3. Press the
[MENU] button.
The menu list will appear.
4. Move the
[Joystick] up or down to select
<Memory>, then press the [Joystick].
5. Move the
[Joystick] up or down to select <File
No.>, then press the [Joystick].
6. Move the
[Joystick] up or down to select the
desired option (Series or Reset), then press the
[Joystick].
The selected option is applied.
7. To exit, press the
[MENU] button.
Note
When you set File No. to Series, each file is assigned
with a different number so as to avoid duplicating file
names.
It is convenient when you want to manage your files on a PC.
93
中 文
ENGLISH
4
Move
OK
Select
MENU
Exit
M.Cam Mode
►Memory
Photo Quality
File No.
►Super Fine
►Series
6
Move
OK
Select
MENU
Exit
Series
Reset
M.Cam Mode
►Memory
Photo Quality
File No.