Filter
Top Products
ADJUSTMENTS
1. SYNC
1-1. V sync phase adjustment
When using a camera switcher to connect 2 cameras or more to
one monitor, there may be a vertical roll of the images when
switched. In such a case, set as described below.
1 Set the SYNC switch (4) to L-L.
The on-screen setting will automatically switch to L-L. Press
the CURSOR (j or l) button to select the on-screen L-L
setting (get it flashing), then press the SET button. The
adjustment sub-menu “ADJUSTMENT FOR L-L” will be
displayed.
2 Switch the display on the monitor from camera 1 to camera 2.
Press the CURSOR (d or c) button until the vertical sync
phase is obtained. The on-screen marker (b) will move and
the adjustment value will flash according to the vertical sync
phase setting.
Note:
When an adjustment is made, the PRESET setting will
automatically switch to OFF. To return to the initial value, just
return the PRESET setting to ON, then press the SET button.
3 When finished.
1 Press the CURSOR (j or l) button to select END (get it
flashing), then press the SET button to return to the
normal camera display, or
2 Press the CURSOR (j or l) button to select MENU (get
it flashing), then press the SET button to return to the
“MENU FOR ADJUSTMENT” display.
MENU FOR ADJUSTMENT
SYNC L-L
IRIS AI
BLC ON
LL
INT
SET
CURSOR
CURSOR
ADJUSTMENT FOR L-L
(V SYNC PHASE)
o------z------p 524
ADJUSTMENT FOR L-L
(V SYNC PHASE)
o------z------p 415
PRESET OFF
END MENU
12
L53P4/US GB 1998, 3, 11
English 15