Filter
Top Products
ADJUSTMENTS
2. IRIS
2-1. Auto-iris level adjustment
1 Set the IRIS switch (10) to AI.
The on-screen setting will automatically switch to AI. Press the
CURSOR (j or l) button to select the on-screen AI setting
(get it flashing), then press the SET button. The adjustment
sub-menu “ADJUSTMENT FOR AI” will be displayed.
2 Press the CURSOR (d or c) button until the desired iris level
is obtained. The on-screen marker (b) will move and the
adjustment value will flash according to the iris level setting.
Note:
When an adjustment is made, the PRESET setting will
automatically switch to OFF. To return to the initial value, just
return the PRESET setting to ON, then press the SET button.
3 When finished.
(Refer to step 3 on page 15.)
Notes:
• If IRIS is set to EI (electronic iris mode), the SHUTTER setting
function will not operate.
• When the AGC switch is set to OFF the IRIS cannot be set to
EI.
MENU FOR ADJUSTMENT
SYNC INT
IRIS AI
BLC ON
AI
EI
SET
CURSOR
ADJUSTMENT FOR AI
(IRIS LEVEL)
o------z------p 23
Example:
When the image is dark,
press the CURSOR (d or
c) button to move the
on-screen marker close to
the position indicated above.
ADJUSTMENT FOR AI
(IRIS LEVEL)
o------z------p 35
PRESET OFF
END MENU
L53P4/US GB 1998, 3, 11
English 17