Filter
Top Products
ADJUSTMENTS
7. APERTURE
1 Press the CURSOR (j or l) button to select NEXT PAGE
(get it flashing), then press the SET button. The second page
of the “MENU FOR ADJUSTMENT” will be displayed.
2 Press the CURSOR (j or l) button to select APERTURE (get
it flashing), then press the SET button. The adjustment
sub-menu “ADJUSTMENT FOR APERTURE” will be displayed.
3 Press the CURSOR (d or c) button to adjust the aperture
setting (0 to 15 range). The on-screen marker (b) will move
and the adjustment value will flash according to the aperture
setting.
At this time the menu display will be cancelled, and you
cannot return from this display to the menu display. (This
happens even if the PRESET setting is set to ON.) To return to
the camera display, use the CURSOR buttons to select END
(get it flashing), then press the SET button.
A higher setting value will give a sharp pictures, a lower
setting value will give a soft pictures.
Note:
When an adjustment is made, the PRESET setting will
automatically switch to OFF. To return to the initial values, just
return the PRESET setting to ON, then press the SET button.
4 When finished.
(Refer to step 3 on page 15.)
CURSOR
SHUTTER 60
WRITE PROTECT OFF
NEXT PAGE END
SET
ADJUSTMENT FOR APERTURE
o------z------p 9
PRESET OFF
END
MENU FOR ADJUSTMENT
CAMERA ID ON
APERTURE
ADJUSTMENT FOR APERTURE
o------z------p 6
L53P4/US GB 1998, 3, 11
English 25