Sanyo VCC-5974 Security Camera User Manual


 
6. CAMERA ID
1 Press the CURSOR (j or l) button to select NEXT PAGE
(get it flashing), then press the SET button. The second page
of the “MENU FOR ADJUSTMENT” will be displayed.
(Refer to page 13.)
2 With the CAMERA ID ON setting flashing, press the SET
button. The sub-menu “CAMERA ID SETTING” will be
displayed.
The camera ID will be displayed. If no ID has been previously
entered, ?????? will be displayed.
3 To change or enter a camera ID, press the SET button again.
The input sub-menu “CAMERA ID SETTING” will be displayed.
4 Example: To enter the camera ID S123AB
Press the CURSOR buttons to select the desired alphanumeric
character or symbol (i.e. S), then press SET. The first ? or
character in the camera ID will change to “S”.
Repeat the same method to enter the desired camera ID
(maximum of 6 characters or symbols).
Note:
The symbol c indicates a blank space. When entered in a camera
ID, it will be displayed as a blank space.
5 When finished entering the camera ID.
Press the CURSOR (d or c) button to select MENU (get it
flashing), then press the SET button to return to the “MENU
FOR ADJUSTMENT” display.
6 To correct the entered camera ID, repeat steps 2 to 5.
7 When finished.
Press the CURSOR (j or l) button to select END (get it
flashing), then press the SET button to return to the normal
camera display.
CURSOR
SHUTTER 60
WRITE PROTECT ON
NEXT PAGE END
SET
CAMERA ID SETTING
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
0123456789:-p
MENU
CAMERA ID IS ??????
MENU FOR ADJUSTMENT
CAMERA ID ON
APERTURE
CAMERA ID SETTING
CAMERA ID IS ??????
CAMERA ID SETTING
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
0123456789:-p
MENU
CAMERA ID IS S123AB
MENU FOR ADJUSTMENT
CAMERA ID ON
APERTURE
WRITE PROTECT ON
PREVIOUS PAGE END
L53P4/US GB 1998, 3, 11
24 English