Filter
Top Products
PARTS NAMES
9 Camera setup section (under the cover)
This unit factory settings are as indicated below. These settings
are for when using a 1/3 inch CS mount DC (without EE internal
amplifier) type lens. However, if due to installation conditions or
environment the settings may need to be modified for best
results (see "SETTINGS"). To access the controls, remove the
cover fixing screw, then remove the cover.
Control name Position
a
High speed electronic shutter
switches (ES)
All OFF: 1/60 sec
b
Internal/Line lock switch (SYNC) INT
c
Auto gain control switch (AGC) ON
d
White balance switch (WB) all ON: ATW
e
Backlight compensation switch
(BLC)
ON
f
Electronic iris (EI)/
Auto iris (AI) switch
AI
g
Auto-iris lens switch (A.I. LENS) DC
Notes:
• When using a 1/2 or 2/3 inch C mount VIDEO (with EE
internal amplifier) auto-iris type lens, set the A.I. LENS switch
to the VIDEO position.
The settings entered in the camera setup section can be
displayed using the on-screen menu.
• If not using an auto-iris lens, make sure the BLC switch is set
to OFF.
9
2341
a
ON
67
85910
23
INT
1
OFF
78
OFF
OFFEI
I
R
I
S
AIONES LL ON
ON WB
BLCSYNC FL
AGC
b
c
d
e
f
g
L53P4/US GB 1998, 3, 11