Filter
Top Products
ADJUSTMENT FOR BLC
BLC MODE PRESET 1
ADJUSTMENT FOR BLC
(SIZE)
ADJUSTMENT FOR BLC
(POSITION)
WINDOW WEIGHTING
W0 1
W1 1
W2 3
W3 3
W4(FIX) 15
PRESET OFF
END MENU
3. BLC
3-1. Setting the light measuring area
characteristics (size, position and
distribution) for the MANUAL 1 setting
1 Set the BLC switch (9) to ON. The on-screen setting for BLC will
automatically switch to ON. Press the CURSOR (j or l) button
to select the on-screen ON setting (get it flashing), then press the
SET button. The adjustment sub-menu “ADJUSTMENT FOR BLC”
will be displayed.
2 Press the CURSOR (d or c) button until MANUAL 1 is
selected, then press the SET button. The adjustment
sub-menu “SIZE” will be displayed.
3 Press the CURSOR buttons to set the size of the area, then
press the SET button. The adjustment sub-menu “POSITION”
will be displayed.
4 Press the CURSOR buttons to move (up, down, right, left) the area
to the desired position, then press the SET button. The adjustment
sub-menu “WINDOW WEIGHTING” will be displayed.
Note:
The WINDOW WEIGHTING default values are W0 : 1, W1 : 1, W2
: 3, W3 : 3, W4 : 15 (the value for W4 is fixed to 15 and cannot
be modified).
MENU FOR ADJUSTMENT
SYNC INT
IRIS AI
BLC ON
ON
OFF
SET
CURSOR
ADJUSTMENT FOR BLC
BLC MODE MANUAL1
PRESET1_PRESET2_MANUAL1_MANUAL2
SET
CURSOR
ADJUSTMENT FOR BLC
(SIZE)
ADJUSTMENT FOR BLC
(SIZE)
CURSOR
CURSOR
CURSOR
(p)
(o)
(l)
(j)
ADJUSTMENT FOR BLC
(POSITION)
L53P4/US GB 1998, 3, 11