Sanyo VCC-5974 Security Camera User Manual

5. AGC
1 Set the AGC switch (6) to ON.
The on-screen setting for AGC will automatically switch to
ON. Press the CURSOR (j or l) button to select the
on-screen ON setting (get it flashing), then press the SET
button. The adjustment sub-menu will be displayed.
2 Setting the GAMMA
Press the CURSOR (d or c) button to select ON or OFF,
according to the conditions described below.
ON (0.45): For natural looking images. The image signal is
compressed and this setting is recommended
under normal conditions.
OFF (1): The image signal is not compressed. This setting is
recommended when processing the images.
When finished setting the gamma, press the CURSOR (l) button