Filter
Top Products
ADJUSTMENTS
4. WHITE BALANCE
4-1. PRESET MODE 2 (indoors, fluorescent
lighting) setting adjustment
1 Set the WB switches to the PRESET mode (switch 7 to OFF
and switch 8 to ON).
The on-screen setting for WHITE BALANCE will automatically
switch to PRESET. Press the CURSOR (j or l) button to
select the on-screen PRESET setting (get it flashing), then press
the SET button. The adjustment sub-menu “ADJUSTMENT
FOR WB” will be displayed.
2 Press the CURSOR (d or c) button until MODE 2 is
selected, then press the SET button. The adjustment
sub-menu “OFFSET” will be displayed.
3 Press the CURSOR (d or c) button to adjust the R (red)
offset. The on-screen marker (b) will move and the
adjustment value will flash according to the red offset setting.
When finished setting the red offset, press the CURSOR (l)
button to select B (blue).
Press the CURSOR (d or c) button to adjust the B (blue)
offset. The on-screen marker (b) will move and the
adjustment value will flash according to the blue offset setting.
Note:
When an adjustment is made, the PRESET setting will
automatically switch to OFF. To return to the initial values, just
return the PRESET setting to ON, then press the SET button.
4 When finished.
(Refer to step 3 on page 15.)
Note:
The OFFSET settings for MODE 1 and MODE 3 are made by
following the same method as described for MODE 2.
MENU FOR ADJUSTMENT
SYNC INT
IRIS AI
BLC ON
WHITE BALANCE PRESET
AGC ON
7
SET
CURSOR
8
WB
ADJUSTMENT FOR WB
WB PRESET MODE 2
ADJUSTMENT FOR WB
WB PRESET MODE 1
ADJUSTMENT FOR WB
(OFFSET)
R o------z------p 29
B o------z------p189
PRESET OFF
END MENU
L53P4/US GB 1998, 3, 11
English 21