Filter
Top Products
Sending an Image Using a Rapid Key or Speed Dial Number
27
10
Enter the name of the party by pressing the letter entry keys
(max. of 20 characters). (Make sure the Rapid Key overlay is
flipped down.)
11
Press .
12
Press or to select the file format (TIFF or PDF) and
compression method (G3, G4, or NO COMPRESSION) for the
document that will be sent as an e-mail attachment. (Note: You
can override this setting during the transmission procedure.)
13
Press .
14
Return to Step 5 to program another number, or press
repeatedly to return to the date and time display.
• If you programmed a Rapid Key number, you can write the name of
the destination on the label above the Rapid Key.
START/
ENTER
START/
ENTER
STOP
DESTINATION SET
SELECT FILE FORMAT
1=TIFF-G4
2=TIFF-G3
3=TIFF-NO COMPRESSION
4=PDF-G4
5=PDF-G3
Editing a Rapid Key or Speed Dial number
To make changes in a Rapid Key or Speed Dial number, repeat the
programming procedure. Select the Rapid Key or Speed Dial number
for which you want to make changes in Step 5, and then change the
programmed information as needed in the following steps.
Clearing a Rapid Key or Speed Dial number
To clear a Rapid Key or Speed Dial number, select CLEAR in Step 3
of the programming procedure, press , select the Rapid Key or
Speed Dial number as explained in Step 5, and then press .
START/
ENTER
START/
ENTER