Sharp FONS2 Photo Scanner User Manual


 
Installing the Network Scanner Software
33
-Convert By OCR (name displayed: Sharp-OCR)
Converts a scanned file to an editable document.
-Send Email (name displayed: Sharp-Email)
Launches your default e-mail application so the file can be e-mailed.
-Sharpdesk Desktop (name displayed: Sharp-Desk),
Launches the Sharpdesk application (this is the default).
Network Scanner Tool is shipped with 2 pre-defined Process
Definitions if you install only Network Scanner Tool.
-Send Email (name displayed: Sharp-Email),
-My Documents (name displayed: Sharp-MyDocs)
Stores the file in the “My Documents” folder in your computer (this
is the default).
4
Select the machine (or machines) that you wish to use as a network
scanner. The name that initially appears is the machine name set
during the installation of the network scanning function. If a name was
not set, “FO-DC500(600)” (or a higher number if there are multiple
FO-DC500/600 machines on the network) will appear.
Click the
Properties
button and then the
Advanced
button, and select
whether your computer uses an IP address or a host name on the
network (ask your network administrator if you do not know).
When finished, click Next.
The FO-DC500/600 is automatically detected on the network.
The settings in Steps 3 and 4 can be changed later by clicking the
Windows
Start
button, pointing to
Programs
,
Sharpdesk
and then
selecting
Network Scanner Tool Configuration
. For more details, see
on-line Help or the Network Scanner Tool User's Guide in the CD-ROM.