Filter
Top Products
Page 14 Configuring Your SRA 1200/4200
Configuring SRA Network Settings
You will now configure your SRA 1200/4200 network settings.
Refer to the notes you took in the “Recording Configuration
Information” on page 6 to complete this section.
Configuring DNS / WINS
1. Navigate to the Network > DNS page in the management
interface.
2. Enter a unique name for your SonicWALL SRA in the
SSL-VPN Gateway Hostname field.
3. Enter your Primary DNS Server information.
4. (Optional) Enter a secondary DNS server in the
Secondary DNS Server field.
5. (Optional) Enter your DNS Domain.
6. (Optional) Enter your WINS servers in the Primary WINS
Server and Secondary WINS Server fields.
7. Click Accept.
Configuring the X0 IP Address for Scenario B and Scenario C
If you are deploying the SRA in either Scenario B, SRA on an
Existing DMZ or Scenario C, SRA on the LAN, you need to
reset the IP address of the X0 interface on the SRA to an
address within the range of the existing DMZ or the existing
LAN.
To configure the X0 IP address for either of these scenarios:
1. Navigate to the Network > Interfaces page.
2. Click the Configure icon for the X0 interface from the
Interfaces table.