Filter
Top Products
Page 32 Scenario B: SRA on an Existing DMZ
13. In the 'Add Rule' window, create a rule to allow access to
the LAN for the address group you just created:
14. Click OK to create the rule.
Continue to "Testing Your Remote Connection" on page 39
Scenario B: SRA on an Existing DMZ
This section provides procedures to configure your gateway
appliance based on Scenario B. This section contains the
following subsections:
Prerequisites
• Connecting to a SonicWALL Security Appliance - page 32
• Allowing WAN -> DMZ Connection - page 33
• Allowing DMZ -> LAN Connection - page 34
Connecting to a SonicWALL Security Appliance
1. Using a computer connected to your LAN, launch your
Web browser, and enter the IP address of your existing
SonicWALL security appliance in the Location or Address
field.
2. When the management interface displays, enter your
User Name and Password in the appropriate fields and
click Login.
Note: Remember that you are logging into your SonicWALL
firewall, not the SonicWALL SRA.
Action Allow
From Zone SRA
To Zone LAN
Service Any
Source The address group you just created,
such as SonicWALL_SRA_Group
Destination Any
Users Allowed All
Schedule Always on
Enable Logging Selected
Allow Fragmented Packets Selected