Filter
Top Products
SonicWALL SRA 1200/4200 Getting Started Guide Page 39
Testing Your Remote Connection
You have now configured your SonicWALL security appliance
and SonicWALL SRA for secure SSL-VPN remote access.This
section provides instructions to verify your connection using a
remote client on the WAN.
Verifying a User Connection from the Internet
1. From a WAN connection outside of your corporate network,
launch a Web browser and enter the following:
https://<WAN_IP_address_of_gateway_device>
2. When prompted, enter the User Name and Password
created in "Adding a Local User" on page 13 of this guide.
3. Select LocalDomain from the drop-down menu and click
Login. The SonicWALL Virtual Office screen appears in
your Web browser.
4. Click NetExtender to start the NetExtender client
installation.
5. If prompted, click Install to complete the client installation.
6. Ping a host on your corporate LAN to verify your remote
connection.
You have now successfully set up your SonicWALL SRA.
Tip: It is easier for remote users to access the SonicWALL
SRA appliance using an a fully qualified domain name
(FQDN) rather than an IP address. It is recommended
that you create a DNS record to allow for FQDN access
to your SonicWALL SRA. If you do not manage your
own public DNS servers, contact your ISP for
assistance.