Filter
Top Products
Page 30 Scenario A: SRA on a New DMZ
5. On the 'Server Private Network Configuration' page, enter
the following, and click Next:
6. On the 'Server Public Information' page, accept the
default IP address, or enter an IP address in your
allowed public IP range. Click Next.
Note: The default IP address is the WAN IP address of your
SonicWALL security appliance. If you accept this
default, all HTTP and HTTPS traffic to this IP address
will be routed to your SonicWALL SRA.
7. The 'Public Server Configuration Summary' page displays
all the configuration actions that will be performed to create
the public server. Click Apply to create the configuration
and allow access from the WAN to the SRA on the DMZ.
Allowing an SRA -> LAN Connection
When users have connected to the SRA, they need to be able
to connect to resources on the LAN. To allow an SRA to LAN
connection, perform the following steps:
1. Navigate to the Network > Address Objects page.
2. In the 'Address Objects' section, click .
3. In the 'Add Address Object' dialog box, create an address
object for the X0 interface IP address of your SonicWALL
SRA:
4. Click Add to create the object. Once done, click Close.
5. Click again to create an address object for
the NetExtender range.
Server Name Name for the SonicWALL SRA
Server Private
IPAddress
SonicWALL SRA’s 'X0' IP address,
192.168.200.1 by default
Server Comment Brief description of the server
Name Name for the SonicWALL SRA
Zone Assignment SRA
Type Host
IP Address SonicWALL SRA’s 'X0' IP address,
192.168.200.1 by default