Filter
Top Products
Page 34 Scenario B: SRA on an Existing DMZ
Allowing DMZ -> LAN Connection
When users have connected to the SRA, they need to be able
to connect to resources on the LAN.
1. Navigate to the Network > Address Objects page.
2. In the 'Address Objects' section, click .
3. In the 'Add Object' dialog box, create an address object
for the X0 interface IP address of your SonicWALL SRA,
then click OK.
4. Click again to create an address object for
the NetExtender range.
5. In the 'Add Object' dialog box, create an address object
for the X0 interface IP address of your SonicWALL SRA,
then click OK.
6. In the 'Address Groups' section, click .
Name Name for the SonicWALL SRA
Zone Assignment DMZ
Type Host
IP Address 'X0' IP address of the SRA appliance
within your DMZ range, such as
10.1.1.200
Name Name for NetExtender
Zone Assignment DMZ
Type Range
Starting IP Address Start of the NetExtender IP address
range within your DMZ range, e.g.,
10.1.1.220
Ending IP Address End of the NetExtender IP address
range within your DMZ range, e.g.,
10.1.1.250