Filter
Top Products
Page 16 Configuring Your SRA 1200/4200
Adding a NetExtender Client Route
NetExtender allows remote clients to have seamless access to
resources on your local network. You can also enable Tunnel
All Mode so that, when NetExtender clients connect, all the
traffic will be tunneled through the NetExtender connection.
To configure a NetExtender client route:
1. Navigate to the NetExtender > Client Routes page.
2. To force all SRA client traffic to pass through the
NetExtender tunnel, select Enabled from the Tunnel All
Mode drop-down list.
3. Click Add Client Route.
4. Enter the IP address of the trusted network to which
you would like to provide access with NetExtender in
the Destination Network field. For example, if you are
connecting to an existing DMZ with the network
192.168.50.0/24 and you want to provide access to your
LAN network 192.168.168.0/24, you would enter
192.168.168.0.
5. Enter your subnet mask in the Subnet Mask field.
6. Click Add to finish adding this client route.