Filter
Top Products
45 (GB)
2 Turn the Jog dial to set to USE and turn the Shuttle
dial clockwise.
3 Set when to switch to summer (daylight savings)
time on the ON line.
WEEK: What day of which (first, second, third,
fourth, or last) week in the specified month on
which to switch
MONTH: Month in which to switch
TIME: Time (hours:minutes) when to switch
4 Similarly set when to return to the standard time on
the OFF line.
Adjusting the time using the CLOCK IN/
OUT terminals
To adjust the built-in clock of this unit and/or the
clocks of another connected HSR-X200/X200P units
using the CLOCK IN/OUT terminals on the rear panel,
set the hours and minutes for ADJUST. TIME of EXT.
CLOCK SET.
The output at the CLOCK OUT terminal will drop to
0 V at the time you specify here.
When the CLOCK IN terminal is short-circuited to the
COM terminal, the built-in clock will be set to the time
you specify here, and the output at the CLOCK OUT
terminal will drop to 0 V at the same time.
Be sure to set ADJUST. TIME of EXT. CLOCK SET
to the same time on all the connected HSR-X200/
X200P units.
When the settings are completed
Press the EXIT/OSD button to exit the menu.
CLOCK IN/OUT connection examples
1: When adjusting the time by using an external
switch
CLOCK
IN
CLOCK
OUT
COM
CLOCK
INCOM
CLOCK
INCOM
COM
CLOCK
OUT
COM
RS-232C
IN INOUT OUT
WARNING OUT
CLOCK
NON REC OUT
ALARM
RESET
FULL
ALARM
FULL
ON
RS485
TERMINATE
OFF
-AC IN
COMCOM
AB
INOUTCOM COMCOMCOM COM
REMOTE
RS485
SERIES
SW OUT
RS-232C
IN INOUT OUT
WARNING OUT
CLOCK
NON REC OUT
ALARM
RESET
FULL
ALARM
FULL
ON
RS485
TERMINATE
OFF
-AC IN
COMCOM
AB
INOUTCOM COMCOMCOM COM
REMOTE
RS485
SERIES
SW OUT
RS-232C
IN INOUT OUT
WARNING OUT
CLOCK
NON REC OUT
ALARM
RESET
FULL
ALARM
FULL
ON
RS485
TERMINATE
OFF
-AC IN
COMCOM
AB
INOUTCOM COMCOMCOM COM
REMOTE
RS485
SERIES
SW OUT
External switch
HSR-X200/X200P
HSR-X200/X200P
HSR-X200/X200P