Filter
Top Products
12
Installation
To attach a microphone, using a CAC-12
When attaching a long-type microphone, such as an ECM-
674/678, use an optional CAC-12 Microphone Holder.
1 1 Remove the front screw-hole cover on the top then
2 fix the CAC-12 in place with the two screws (+B4
×8)
supplied with the CAC-12.
2 Loosen the screw to open the CAC-12 and attach the
microphone.
If the microphone diameter is small, attach the adaptor A
(supplied with the CAC-12 or the microphone) to the
microphone.
Mounting the Camera to a Tripod
Mount the camera to a tripod, using an optional VCT-U14
Tripod Adaptor.
• Select an appropriate hole from among those at the bottom
of the tripod adaptor considering the balance of the weight
of the camera and the tripod adaptor. If an inappropriate
hole is selected, the camera may fall over.
• Check that the size of the selected hole matches that of the
screw of the tripod. If they do not match, the tripod adaptor
cannot be attached to the tripod securely.
1 1 Attach the tripod adaptor to the tripod and 2
secure it with the screw.
2 Place the camera on the tripod adaptor and slide
forward it along the groove of the tripod adaptor until
it clicks.
To remove the camera from the tripod adaptor
Hold down the red button and pull the lever in the direction of
the arrow.
If the pin of the tripod adaptor does not return to its
original position
After removing the camera, if the pin of the tripod adaptor does
not return to its original position, hold down the red button and
move the lever in the direction of the arrow to return the pin to
its original position. It is not possible to mount a camera with
the pin not seated.
Caution
1
2
CAC-12
A
1
2
1
2
Tripod adaptor
Platform
Lever
Red button