Sony HXC-100 Film Camera User Manual


 
22
Menus
For the items on each page, see “OPERATION Menu” (page
24), “MAINTENANCE Menu” (page 30), or “DIAGNOSIS
Menu” (page 34).
The USER MENU CUSTOMIZE menu allows you to configure
the USER menu as follows:
Creating a new page with items selected from multiple menu
pages
Adding (registering) a menu page (new page you create or
existing menu page) to the USER menu
Deleting (unregistering) a page from the USER menu
Changing the order of pages of the USER menu
To create a new page
While the EDIT page contains factory-preset items, the USER
1 EDIT to USER 19 EDIT pages are all blank in their initial
state. You can register up to 10 items, including blank lines, on
each of these pages.
1 Select USER MENU CUSTOMIZE on the TOP MENU
screen (page 20).
If this is the first time the USER MENU CUSTOMIZE
menu has been displayed, the CONTENTS page of the
menu appears.
If the USER MENU CUSTOMIZE menu has been used
before, the page last accessed appears.
2 If the CONTENTS page is displayed, turn the menu
control knob to move the pointer to any of USER 1
EDIT to USER 19 EDIT then push on the menu control
knob to display the page.
If a different page is displayed, turn the menu control
knob until the desired page appears then push on the
menu control knob to select the page.
Example: When you select the USER 2 EDIT page
3 Move the pointer to the item to be added (this
operation is unnecessary if no item exists on the
page, as shown in the figure for the previous step)
then push on the menu control knob.
The EDIT FUNCTION screen appears.
4 Move the pointer to INSERT and push on the menu
control knob.
The page with the last item added appears.
5 Add the items.
1 Turn the menu control knob until the page that has the
desired items appears, then push on the menu control
knob.
2 Turn the menu control knob to move the pointer to the
desired item, then push on the menu control knob
The USER 2 EDIT page appears again, displaying the
newly added item.
6 Add the remaining items by repeating steps 3 to 5.
You can add up to 10 items on one page.
Menu page title USER menu
No.
Source menu / page No.
<VF OUT> U01 OPERATION 08
<VF DETAIL> U02 OPERATION 04
<FOCUS ASSIST> U03 OPERATION 05
<VF DISPLAY> U04 OPERATION 01
<‘!’ IND> U05 OPERATION 02
<VF MARKER> U06 OPERATION 03
<CURSOR> U07 OPERATION 07
<ZEBRA> U08 OPERATION 06
<SWITCH ASSIGN1> U09 OPERATION 09
<SWITCH ASSIGN2> U10 OPERATION 10
<POWER SAVE> U11 MAINTENANCE M12
<LENS FILE> U12 OPERATION 17
<HEAD SET> U13 OPERATION 11
<INTERCOM LEVEL> U14 OPERATION 12
<MIC GAIN> U15 MAINTENANCE M06
<OUTPUT FORMAT> U16 MAINTENANCE M08
<TEST OUT> U17 MAINTENANCE M10
<SDI OUT> U18 MAINTENANCE M11
<DOWN CONVERTER> U19 MAINTENANCE M09
<TRUNK> U20 MAINTENANCE M13
<ROM VERSION> U21 DIAGNOSIS D03
CONTENTS E00
xx
01.EDIT PAGE
02.USER 1 EDIT
c
03.USER 2 EDIT
04.USER 3 EDIT
05.USER 4 EDIT
06.USER 5 EDIT
07.USER 6 EDIT
08.USER 7 EDIT
09.USER 8 EDIT
10.USER 9 EDIT
TOP
USER 2 EDIT E03
c
TOP
EDIT FUNCTION
c
INSERT
MOVE
DELETE
BLANK
ESC
<SW STATUS> P01
FLARE :
c
ON
GAMMA : ON
BLK GAM : OFF
KNEE : ON
WHT CLIP: ON
DETAIL : ON
LVL DEP : ON
SKIN DTL: OFF
MATRIX : OFF
ESC