Sony HXC-100 Film Camera User Manual


 
35
Appendices
Aliasing
When fine patterns, stripes, or lines are shot, they may appear
jagged or flicker.
About digital triax transmission
A powerful error-correction function is incorporated for the
transmission between the camera and CCU. However, if an
error occurs on long-distance transmission because of
external noise or for some other reason, the compensation by
interpolation that partially uses the previous picture may
operate.
In digital triax transmission, the following video delay in
transmission may occur:
The video delay in transmission between the camera and
the CCU is approx. 9 msec to 12 msec.
A delay of about 1 frame occurs on the viewfinder display if
a camera image is sent back from the CCU to the camera as
a return signal.
The prompter video will delay approx. 5 frames in the
standard mode. (For the prompter video, either the standard
mode or the low-delay mode using simplified images can be
selected on the CCU).
An appropriate delay is applied to the MIC 1 and 2 audio
signals from the CCU according to the video delay.
It takes a certain time until the video signal transmitted
between the camera and the CCU becomes stable after
power is applied. This is not a malfunction.
About the distances of triax transmission
The maximum and minimum transmission distances allowed
for triax cable connection are shown in the table below. The
distances may vary according to the conditions, such as cable
degradation.
Allowable transmission range when using triax cables with the
following characteristics:
3.8 dB to 45.6 dB at 100 MHz (including the loss at
connectors)
Error Messages
If a problem occurs during operation, a warning message is
displayed.
Using a “Memory Stick”
When a “Memory Stick” is inserted in the camera, the file data
can be stored on the “Memory Stick,” which enables you to
share data among cameras.
Usable types of “Memory Stick”
You can use a “Memory Stick,” a “Memory Stick Duo,” a
“Memory Stick PRO,” a “Memory Stick PRO Duo,” and a
“MagicGate Memory Stick” with this product. You can use a
“Memory Stick Duo” or a “Memory Stick PRO Duo” without any
adaptor. However, the MagicGate copyright protection
1)
is not
valid with this product.
1) MagicGate is copyright protection technology that uses encryption
technology.
Note on data read/write speed
Data read/write speed may vary depending on the
combination of the “Memory Stick” and “Memory Stick”
compliant product you use.
To insert a “Memory Stick”
Insert a “Memory Stick” with the label side up into the “Memory
Stick” slot until it clicks and the access lamp lights in red.
Access lamp
If the access lamp is lit or is flashing, data is being read from
or written to the “Memory Stick.” At this time, do not shake the
product or subject it to shock. Do not turn off the power of the
Cable Max. distance Min. distance
Fujikura 8.5-mm dia. 600 m
(1969 ft) 50 m (164 ft)
Fujikura 14.5-mm dia. 1200 m (3937 ft) 100 m (328 ft)
Belden 9232 13.2-mm dia 850 m (2789 ft) 75 m (246 ft)
Message Meaning
TEMP WARNING The internal temperature is
extraordinarily high.
SET SYSTEM CLOCK The time/date of the internal clock have
not been set.
OHB BLOCK NG! A problem is detected in the optical block.
MSU RPN BUSY RPN compensation was attempted using
the camera menu while being operated
from an external device.
Consult Sony service personnel.
VF RPN BUSY RPN compensation was attempted from
an external device while being operated
using the camera menu.
Consult Sony service personnel.
NO MEMORY STICK A “Memory Stick” operation was
attempted with no “Memory Stick” in the
slot.
MEMORY STICK
ERROR
An error occurred during access to a
“Memory Stick.”
FORMAT ERROR! A “Memory Stick” operation was
attempted with an unformatted “Memory
Stick.”
MEMORY STICK
LOCKED
File writing was attempted with a write-
protected “Memory Stick.”
FILE ERROR An error occurred while reading a file
from a “Memory Stick.”
OTHER MODEL’S FILE You attempted to read a file of other
models having no compatibility.
FILE NOT FOUND The file you attempted to read does not
exist in the “Memory Stick.”
Message Meaning
OF
F
MENU
STATUS
CANCEL
Access lamp
Label side
“Memory Stick”