Filter
Top Products
Preparation
Assigning the IP Address to the Camera
10
To specify the IP address manually:
Select Use the following IP address, and type the
IP address, Subnet mask and Default gateway in the
relevant boxes.
8
Set the DNS server address.
To obtain the DNS server addresses
automatically:
Select Obtain DNS server address automatically.
To specify the DNS server addresses manually:
Select Use the following DNS server address, and
type the Primary DNS server address and
Secondary DNS server address in the relevant
boxes.
Note
The Third DNS server address and Fourth DNS
server address are invalid for this camera.
9
Set the HTTP port No.
Normally select 80 for the HTTP port No. To use
another port number, select the text box and type a
port number between 1024 and 65535.
10
Type the Administrator name and Administrator
password.
The default settings of both items are “admin.”
Note
You cannot change the Administrator name and
Administrator password in this step. To change
these items, See “Setting the User — User setting
Menu” on page 36.
11
Confirm that all items are correctly set, then click
OK.
If “Setting OK” is displayed, the IP address is
correctly assigned.
12
To access the camera directly, double-click the
camera name on the list.
The welcome page of the network camera SNC-DF70N/
DF70P is displayed.
Note
If the IP address is not set correctly, the welcome page
does not appear after step 12. In this case, try to set the
IP address again.