Filter
Top Products
2
Owner's Record
The model and serial numbers are located on the bottom.
Record the serial number in the space provided below.
Refer to these numbers whenever you call upon your
Sony dealer regarding this product.
Model No.
Serial No.
To avoid electrical shock, do not open the
cabinet. Refer servicing to qualified
personnel only.
WA RN ING
This installation should be made by a qualified service
person and should conform to all local codes.
WA RN ING
A readily accessible disconnect device shall be
incorporated in the building installation wiring.
WA RN ING (For Installers only)
Instructions for installing the equipment on the ceiling:
After the installation, ensure the connection is capable
of supporting four times the weight of the equipment
downwards.
CAUTION
The rating label is located on the bottom.
CAUTION for LAN port
For safety reason, do not connect the LAN port to any
network devices that might have excessive voltage.
The LAN port of this unit is to be connected only to the
devices whose power feeding meets the requirements
for SELV (Safety Extra Low Voltage) and complies with
Limited Power Source according to IEC 60950.
POWER REQUIREMENTS
The SNC-DF70N/DF70P operates on 24 V AC or 12 V
DC.
The SNC-DF70N/DF70P automatically detects the
power.
Caution for U.S.A. and Canada
CAUTION
Use a Class 2 power suply which is UL Listed (in the
U.S.A.) or CSA-certified (in Canada).
Caution for other countries
CAUTION
Use a power supply rated 24 V AC or 12 V DC which
meets the requirements for SEL V (Safety Extra Low
Voltage) and complies with Limited Power Source
according to IEC 60950.
For customers in the U.S.A.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the
following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and
receiver.
– Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV
technician for help.
You are cautioned that any changes or modifications not
expressly approved in this manual could void your
authority to operate this equipment.
The shielded interface cable recommended in this
manual must be used with this equipment in order to
comply with the limits for a digital device pursuant to
Subpart B of Part 15 of FCC Rules.
For customers in Canada
This Class B digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.
ATTENTION
The electromagnetic fields at specific frequencies may
influence the picture of the unit.
WARNING