Filter
Top Products
Preparation
Basic Configuring by the Administrator
12
Basic Configuring by the
Administrator
You can monitor the image of the camera only logging
in with the initial condition of this network camera. You
can also set various functions according to the install
position, network condition or purpose of the camera.
We recommend you configure the following items
before monitoring the image from the camera.
Setting contents Setting menu
Set the camera function suitable for the installation place. Exposure mode (page 29)
Set the format of the image sent from the camera (MPEG 4 or JPEG). Video mode (page 28)
Select the brightness of the image sent from the camera. Brightness (page 30)
Select the quality of the image sent from the camera. MPEG4 Tab (page 31)
JPEG Tab (page 31)
Select the size of the image sent from the camera. Image size (page 28)
Select weather the audio from the camera microphone is sent or not. Microphone (page 29)
Accord date and time of the camera with those of the computer. Date & time Tab (page 26)
Make the setting for sending the monitor image attached to a mail. e-Mail (SMTP) setting Menu (page 38)
Set the access right of the user for the camera. Security setting Menu (page 37)