Filter
Top Products
Others
Using the Supplied Setup Program
54
Others
This section explains how to use the application
software and commands, including the supplied CD-
ROM.
Using the Supplied
Setup Program
Explains the functions except the Network tab in the
Setup Program.
To install the Setup Program, to assign the IP address
and to set the network, see “Assigning the IP address to
the Camera” on page 9 in “Preparations”.
Starting the Setup Program
Select Program from Start menu of Windows, then
select Program, IP Setup Program and IP Setup
Program in sequence.
The IP Setup Program starts.
Network tab appears. The IP Setup Program detects
cameras connected to the local network and lists them
on the Network tab window.
Bandwidth Control Tab
The communication bandwidth can be set when the
Video mode of the camera is set to JPEG.
Note
When the Video mode of the camera is set to MPEG4,
the bandwidth cannot be changed.
1
Click the Bandwidth control tab to display the
bandwidth setting window.
The current bandwidth is displayed in Current
bandwidth.
2
Click to select the camera to set the bandwidth from
the list box.
3
Click to select the desired bandwidth from the
Setting bandwidth list box.
4
Type the Administrator name and Administrator
password in each box.
5
Click OK.
If “Setting OK” is displayed, the bandwidth setting
is completed.