Filter
Top Products
Administrating the Camera
Sending an Image via mail — e-Mail (SMTP) setting Menu
39
OK/Cancel
See “Buttons common to every setting menu” on page
24.
Alarm sending Tab — Setting the
mail sending mode when detecting
the alarm
Set to send the mail with connection to the alarm
detection by the external sensor input or by the built-in
motion detection function.
Alarm sending
Select On to set to send mail with connection to the
alarm detection.
File attachment
Set whether an image file is attached to the mail sent or
not.
When On is selected, the image file made by the settings
below is attached. When Off is selected, only the
message is sent.
Image file name
Type the file name you want to assign to the image to
attach a mail. You can use up to 10 alphanumeric, -
(hyphen) and _ (underscore) for naming.
Suffix
Select a suffix to add to the file name.
None: No suffix is added. The Image file name is
assigned to the image to be sent via an e-Mail.
Date & time: The date & time suffix is added to the
Image file name.
The date/time suffix consists of lower two-digits of
year (2 digits), month (2 digits), date (2 digits), hour
(2 digits), minute (2 digits), second (2 digits), and
consecutive number (2 digits), thus 14-digit number
is added to the file name.
Sequence number: A consecutive number of 10 digits
between 0000000001 and 4294967295 and two fixed
digits 00 is added to the Image file name.
Tip
A consecutive number added to Date & time and
Sequence number is used to identify each of multiple
files created with one alarm event.
Sequence number clear
Click Clear to reset the Sequence number suffix to 1.
Alarm
Select the connected alarm.
Sensor input: The external sensor which is connected to
the sensor input of the camera I/O port.
Motion detection: Click Motion detection button, and
the Motion detection setting menu is displayed. You
can set the motion detection function (page 52).
Note
Motion detection works only when the camera Video
mode is set to MPEG4 and the Cropping is set Off.
Effective period
Set the period when the alarm detection is effective.
Always: The alarm detection is always effective.
Schedule: You can specify the period when the alarm
detection is effective in the schedule setting in the
other section.
Click Schedule and the setting menu for the
Effective period is displayed. (“Setting the Schedule
— Schedule setting Menu” on page 50)
OK/Cancel
See “Buttons common to every setting menu” on page
24.