Filter
Top Products
Administrating the Camera
Setting the Operations from the Viewer Page — Trigger setting Menu
49
Note
While the Video mode is set to MPEG4, the image of
the composite video signal output from the video output
connector of the camera may be distorted during mail
transmission.
FTP client
After checking this, you will be able to select FTP client
in the Trigger setting menu. You can send an image file
to FTP server by selecting FTP and clicking the Trigger
icon.
When you click FTP client button, the Trigger (setting)
FTP client menu is displayed. You can set necessary
options here. The setting options and setting procedures
are the same as those of the FTP client setting menu
(page 41).
Image memory
After checking this, you will be able to select Image
memory in the Trigger setting menu. You can record an
image file to the built-in memory by selecting Image
memory and clicking the Trigger icon.
When you click Image memory button, the Trigger
(setting) Image memory menu is displayed. You can
set necessary options here. The setting options and
setting procedures are the same as those of the Image
Memory setting menu (page 43).
Alarm output 1, 2
After checking this, you will be able to select Alarm
output 1 or Alarm output 2 in the Trigger setting menu.
You can control On (short circuit ) or Off (open) by
selecting Alarm output and clicking the Trigger icon.
Day/Night
After checking it, you will be able to select day/night in
the Trigger setting menu. You can control On (night
mode) or Off (day mode) of the day/night function by
clicking the Trigger icon.
When you click the day/night button, the day/night
setting (Trigger) menu is displayed. You can set the
necessary options here. The setting options and setting