Filter
Top Products
Administrating the Camera
Setting the User — User setting Menu
36
Setting the User
— User setting Menu
When you click User on the Administrator menu, the
User setting menu appears.
Use this menu to set the user names and passwords of
Administrator and up to 9 kinds of users (User 1 to User
9), and the access right of each user.
Administrator, User 1 to 9
Specify User name, Password, Re-type password,
FTP user and Viewer mode for each user ID.
User name
Type a user name between 5 and 16 characters.
Password
Type a password between 5 and 16 characters.
Re-type password
To confirm the password, type the same characters as
you typed in the Password box.
FTP user
Set whether logging in to FTP server is allowed or not.
When you need to log in to FTP server, check it.
Viewer mode
If the user is authenticated when the main viewer is
displayed, you can select the viewer mode displayed
after authentication.
Full: You can operate all functions in this mode.
Light: You can operate the functions other than the
trigger button on the main viewer, TCP/UDP
switching button on the main viewer, and the frame
rate setting.
View: You can monitor only the camera image.
Viewer authentication
Set whether the user is authenticated or not when the
main viewer is displayed.
When you select On, the main viewer is displayed to suit
the authenticated user. When you select Off, select the
view mode of the main viewer page which is displayed
without authentication from among Full, Light or View.
OK/Cancel
See “Buttons common to every setting menu” on page
24.