Filter
Top Products
116
Recording images continuously (DCR-TRV33 only)
You can record still images continuously. Before recording, select a desired mode
described below in the menu settings.
NORMAL [a] (
)
Your camcorder shoots up to 4 still images in 1152 × 864 size or 13 still images in
640 × 480 size at about 0.5 sec intervals.
EXP BRKTG [b] ( )
Your camcorder automatically shoots 3 images at about 0.5 sec intervals at different
exposures.
The POWER switch should be set to .
Operate by touching the panel.
(1) Press FN to display PAGE1.
(2) Press MENU to display the menu.
(3) Select STILL SET in
, then press EXEC (p. 179).
(4) Select BURST, then press EXEC.
(5) Select a desired mode, then press EXEC.
(6) Press EXIT to make the menu display disappear.
(7) Press PHOTO deeply.
Recording still images on “Memory Stick”
– Memory Photo recording
[a] [b]
RET.
EXEC
Rr
EXIT
STILL SET
BURST
QUALITY
IMAGESIZE
MEM SET 1
OFF
NORMAL
EXP BRKTG