Filter
Top Products
190
When operating using the “Memory Stick” (DCR-TRV22/TRV33
only)
Symptom Cause and/or Corrective Actions
• The POWER switch is not set to MEMORY.
c Set it to MEMORY (p. 11).
• The “Memory Stick” is not inserted.
c Insert the “Memory Stick” (p. 10, 109).
• The “Memory Stick” has already been recorded to its full
capacity.
c Delete unnecessary images and record again (p. 143).
• The “Memory Stick” formatted incorrectly is inserted.
c Format the “Memory Stick” using your camcorder or
use another “Memory Stick” (p. 107, 180).
• The write-protect tab on the “Memory Stick” is set to
LOCK.
c Release the lock (p. 106).
• The image is protected.
c Cancel image protection (p. 142).
• The write-protect tab on the “Memory Stick” is set to
LOCK.
c Release the lock (p. 106).
• You tried to delete more than 100 images in one session.
c You can select up to 100 images on the INDEX screen in
one session (p. 144).
• The write-protect tab on the “Memory Stick” is set to
LOCK.
c Release the lock (p. 106).
• The write-protect tab on the “Memory Stick” is set to
LOCK.
c Release the lock (p. 106).
• The write-protect tab on the “Memory Stick” is set to
LOCK.
c Release the lock (p. 106).
• The index screen does not appear.
c Press INDEX to display the index screen, then protect
the image (p. 142).
The “Memory Stick” does not
function.
Recording does not function.
The image cannot be deleted.
You cannot format the “Memory
Stick.”
Deleting all the images cannot be
carried out.
You cannot protect the image.
Types of trouble and how to correct trouble