Filter
Top Products
176
Changing the menu settings
Menu items are displayed as the following icons:
MANUAL SET
CAMERA SET
VCR SET
LCD/VF SET
MEM SET 1 (DCR-TRV22/TRV33 only)
MEM SET 2 (DCR-TRV22/TRV33 only)
CM SET
TAPE SET
SETUP MENU
OTHERS
Selecting the mode setting of each item z is the default setting.
Menu items differ depending on the position of the POWER switch.
The screen shows only the items you can operate at the moment.
Icon/item
MANUAL SET
PROGRAM AE
P EFFECT
FLASH MODE
FLASH LVL
WHT BAL
AUTO SHTR
* DCR-TRV22/TRV33 only
Mode
——
——
z ON
ON
AUTO
AUTO
HIGH
z NORMAL
LOW
——
z ON
OFF
Meaning
To suit your specific shooting requirement (p. 62)
To add special effects like those in movies or on
the TV to images (p. 58, 72)
To trigger the flash (optional) regardless of the
brightness of the surroundings
To trigger the flash (optional) regardless of the
brightness of the surroundings. The flash goes off
prematurely to reduce the red-eye phenomenon.
To trigger the flash (optional) automatically
To trigger the flash (optional) automatically. The
flash goes off prematurely to reduce the red-eye
phenomenon.
To make the flash (optional) level higher than
normal
To use the normal setting
To make the flash (optional) level lower than
normal
To adjust the white balance (p. 52)
To automatically activate the electronic shutter
when shooting in bright conditions
Not to activate the electronic shutter even when
shooting in bright conditions
POWER
switch
*
*
*
*