Filter
Top Products
28
After recording
(1) Close the lens cap.
(2) Set the POWER switch to OFF (CHG).
(3) Close the LCD panel.
(4) Eject the cassette.
(5) Remove the power source.
Adjusting the LCD screen
When you adjust the LCD panel, make sure that the LCD panel is opened up to 90
degrees.
When monitoring on the LCD screen
You can turn the LCD panel over and move it back to your camcorder body with the
LCD screen facing out.
Notes
•When using the LCD screen except in the mirror mode, the viewfinder automatically
turns off.
•If you turn the LCD panel over and move it back to your camcorder body when
recording or recording standby, LCD B.L. (panel brightness) is fixed to “BRT
NORMAL.”
Recording a picture
180°
90°
90°