Filter
Top Products
48
Recording a still image on a tape
– Tape Photo recording (DCR-TRV19 only)
You can record still images such as photographs. You can record about 510 images in
the SP mode and about 765 images in the LP mode on a 60-minute tape.
The POWER switch should be set to .
(1) Keep pressing PHOTO lightly until a still image appears. The CAPTURE
indicator appears. Recording does not start yet.
To change the still image, release PHOTO, select a still image again, and then
press and hold PHOTO lightly.
(2) Press PHOTO deeply.
The still image displayed on the screen when you pressed PHOTO deeply is
recorded for about 7 seconds. The sound during those 7 seconds is also
recorded.
The still image is displayed on the screen until the recording is completed.
Notes
•During tape photo recording, you cannot change the mode or setting.
•When recording a still image, do not shake your camcorder. The image may fluctuate.
•The tape photo recording function does not work when the fader function is on.
CAPTURE
FN
•••••••
FN
1
2
DCR-TRV19