Filter
Top Products
44 RT-PRC005-EN
Table PD-48 — Belt Drive Evaporator Fan Performance — 4 Ton — THC048A3,A4,AW — Horizontal Airflow— Standard Refrigeration System
External Static Pressure (Inches of Water)
.10 .20 .30 .40 .50 .60 .70 .80 .90 1.00
CFM RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP
1-HP Standard Motor & Field Supplied 1-HP Standard Motor & Drive
Low Static Drive (1)
1280 617 0.21 696 0.27 767 0.34 826 0.40 879 0.46 930 0.52 976 0.59 1020 0.66 1060 0.73 1098 0.80
1440 674 0.29 745 0.35 815 0.42 874 0.49 925 0.56 974 0.63 1020 0.70 1064 0.77 1104 0.85 1142 0.92
1600 733 0.38 799 0.45 862 0.53 922 0.60 975 0.68 1020 0.75 1065 0.83 1107 0.91 1147 0.99 1186 1.07
1760 793 0.49 854 0.56 911 0.65 969 0.73 1023 0.82 1069 0.90 1112 0.98 1152 1.07 1191 1.15 1230 1.24
1920 853 0.62 911 0.70 964 0.79 1018 0.88 1069 0.97 1118 1.06 1161 1.15 1201 1.25 1239 1.34 1275 1.43
For Standard Evaporator Fan Speed (RPM), reference Table PD-68.
NOTES:
Data includes pressure drop due to standard filters and wet coils.
No accessories or options are included in pressure drop data.
Refer to Table PD-73 to determine additional static pressure drop due to other options/accessories
Fan Motor Heat (MBH) = 2.829 x Fan BHP+.4024.
1. Field Supplied Fan Sheave AK61 required. Field Supplied Belt may be necessary.
2. Field Supplied Fan Sheave AK41 required. Field Supplied Belt may be necessary.
Trane’s factory supplied motors, in commercial equipment, are
definite purpose motors, specifically designed and tested to operate
reliably and continuously at all cataloged conditions. Using the full
horsepower range of our fan motors as shown in our tabular data
will not result in nuisance tripping or premature motor failure. Our
product’s warranty will not be affected.
1-HP Standard Motor & Field
Supplied High Static Drive (2)
Table PD-48 — Continued
External Static Pressure (Inches of Water)
1.10 1.20 1.30 1.40 1.50
CFM RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP
1-HP Standard Motor
1280 1132 0.88 1167 0.95 1199 1.03 1231 1.10 1260 1.17
1440 1179 1.01 1213 1.09 1245 1.17 1277 1.26 1307 1.34
1600 1223 1.15 1258 1.24 1291 1.33 1322 1.42 — —
1760 1267 1.33 1301 1.42 — — — — — —
1920 —— —— —— —— ——
1-HP Standard Motor &
Field Supplied High Static Drive(2)
Performance
Data
(4 Ton)
High Efficiency
Table PD-49 — Belt Drive Evaporator Fan Performance — 4 Ton — THC048A3,A4,AW — Horizontal Airflow— Dehumidification (Hot Gas Reheat) Option
External Static Pressure (Inches of Water)
.10 .20 .30 .40 .50 .60 .70 .80 .90 1.00
CFM RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP
800 461 0.08 553 0.11 629 0.16 692 0.20 745 0.25 794 0.29 838 0.34 881 0.38 922 0.43 962 0.48
960 509 0.11 600 0.16 672 0.20 736 0.25 791 0.30 841 0.36 887 0.42 927 0.47 966 0.52 1004 0.58
1120 561 0.16 649 0.21 719 0.26 779 0.32 836 0.37 886 0.43 932 0.50 975 0.56 1014 0.63 1052 0.69
1280 617 0.21 696 0.27 767 0.34 826 0.40 879 0.46 930 0.52 976 0.59 1020 0.66 1060 0.73 1098 0.80
***MINIMUM AIR VOLUME REQUIRED FOR USE WITH OPTIONAL ELECTRIC HEAT IS 1280 CFM.
NOTES:
Data includes pressure drop due to standard filters and wet coils.
Data does not include pressure drop due to reheat coil.
1 HP Fan Motor Heat (MBH) = 2.829 x Fan BHP+.4024.
1. BAYLSDR007A Required.
2. BAYLSDR007A Required.
Trane’s factory supplied motors, in commercial equipment, are
definite purpose motors, specifically designed and tested to operate
reliably and continuously at all cataloged conditions. Using the full
horsepower range of our fan motors as shown in our tabular data
will not result in nuisance tripping or premature motor failure. Our
product’s warranty will not be affected.
1-HP Standard Motor & Drive
1-HP Standard Motor & Low
Static Drive Accessory Kit (1)
1-HP Standard Motor & Low Static Drive Accessory Kit (2)
Table PD-49 — Continued
External Static Pressure (Inches of Water)
1.10 1.20 1.30 1.40 1.50
CFM RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP
1-HP Standard Motor & Drive
800 1001 0.54 1038 0.60 1072 0.65 1108 0.71 1142 0.78
960 1040 0.63 1073 0.68 1108 0.75 1141 0.81 1175 0.88
1120 1087 0.75 1119 0.81 1152 0.88 1183 0.94 1213 1.00
1280 1132 0.88 1167 0.95 1199 1.03 1231 1.10 — —