Filter
Top Products
48 RT-PRC005-EN
(7½ Ton)
High Efficiency
Performance
Data
Table PD-56 — Belt Drive Evaporator Fan Performance — 7½-Ton — THC092A3,A4,AW — Downflow Airflow— Standard Refrigeration System
External Static Pressure (Inches of Water)
.10 .20 .30 .40 .50 .60 .70 .80 .90 1.00
CFM RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP
2-HP Standard Motor & Field Supplied
Low Static Drive (1)
2400 — — — — — — 583 0.50 627 0.61 669 0.72 708 0.83 743 0.95 776 1.08 808 1.21
2700 — — — — — — 611 0.60 653 0.71 693 0.83 731 0.95 768 1.07 801 1.20 832 1.33
3000 — — — — 604 0.61 643 0.71 682 0.83 719 0.95 755 1.08 791 1.21 824 1.35 856 1.48
3300 — — 599 0.63 639 0.74 678 0.86 713 0.97 748 1.09 783 1.23 815 1.37 848 1.52 880 1.66
3600 601 0.68 640 0.79 675 0.89 713 1.02 748 1.14 780 1.26 811 1.40 844 1.55 874 1.70 904 1.86
2-HP Standard Motor & Drive
For Standard Evaporator Fan Speed (RPM), reference Table PD-68.
NOTES:NOTES:
NOTES:NOTES:
NOTES:
Data includes pressure drop due to standard filters and wet coils.
No accessories or options are included in pressure drop data.
Refer to Table PD-73 to determine additional static pressure drop due to other options/accessories
2-HP Fan Motor Heat (MBH) = 2.000 x Fan BHP+.5000.
3-HP Fan Motor Heat (MBH) = 2.900 x Fan BHP+.4750
1. Field Supplied Fan Sheave AK79 and Belt AX38 required.
Trane’s factory supplied motors, in commercial equipment, are
definite purpose motors, specifically designed and tested to operate
reliably and continuously at all cataloged conditions. Using the full
horsepower range of our fan motors as shown in our tabular data will
not result in nuisance tripping or premature motor failure. Our
product’s warranty will not be affected.
Table PD-56— Continued
External Static Pressure (Inches of Water)
1.10 1.20 1.30 1.40 1.50 1.60 1.70 1.80 1.90 2.00
CFM RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP
2-HP Standard Motor & Drive
2400 839 1.34 868 1.48 898 1.61 926 1.75 953 1.89 980 2.04 1006 2.18 1032 2.34 1056 2.49 1080 2.64
2700 862 1.48 891 1.62 918 1.77 946 1.92 971 2.07 998 2.23 1023 2.38 1049 2.54 1074 2.70 1097 2.86
3000 886 1.63 915 1.78 942 1.93 968 2.09 994 2.25 1019 2.42 1044 2.59 1067 2.75 1092 2.93 1115 3.09
3300 910 1.81 939 1.96 967 2.12 993 2.28 1019 2.45 1043 2.62 1066 2.79 1091 2.98 1113 3.15 1136 3.34
3600 933 2.01 962 2.17 990 2.33 1016 2.49 1042 2.66 1067 2.84 1091 3.02 1114 3.21 1137 3.39 1158 3.58
3-HP Oversized Motor & Drive
Table PD-57 — Belt Drive Evaporator Fan Performance — 7½-Ton — THC092A3,A4,AW — Downflow Airflow — Dehumidification (Hot Gas Reheat) Option
External Static Pressure (Inches of Water)
.10 .20 .30 .40 .50 .60 .70 .80 .90 1.00
CFM RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP
1500 — — — — — — 510 0.30 557 0.39 602 0.48 643 0.57 682 0.66 718 0.76 753 0.87
1800 — — — — 481 0.27 534 0.36 579 0.45 621 0.55 661 0.65 699 0.75 735 0.86 770 0.97
2100 — — — — 506 0.33 557 0.42 604 0.52 645 0.62 683 0.73 719 0.85 754 0.97 787 1.08
2400 — — 487 0.32 536 0.40 583 0.50 627 0.61 669 0.72 708 0.83 743 0.95 776 1.08 808 1.21
***MINIMUM AIR VOLUME REQUIRED FOR USE WITH OPTIONAL ELECTRIC HEAT IS 2400 CFM.
NOTES:
Data includes pressure drop due to standard filters and wet coils.
Data does not include pressure drop due to reheat coil.
1 HP Fan Motor Heat (MBH) = 2.829 x Fan BHP+.4024.
1. BAYLSDR009A Required.
2. BAYLSDR009A Required.
Trane’s factory supplied motors, in commercial equipment, are
definite purpose motors, specifically designed and tested to operate
reliably and continuously at all cataloged conditions. Using the full
horsepower range of our fan motors as shown in our tabular data
will not result in nuisance tripping or premature motor failure. Our
product’s warranty will not be affected.
2-HP Standard Motor & Low Static Drive
Accessory Kit (1)
2-HP Standard Motor & Drive
Table PD-57— Continued
External Static Pressure (Inches of Water)
1.10 1.20 1.30 1.40 1.50 1.60 1.70 1.80 1.90 2.00
CFM RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP
1500 785 0.99 818 1.11 847 1.23 875 1.35 903 1.48 930 1.62 954 1.74 977 1.88 1001 2.01 1023 2.15
1800 802 1.09 833 1.20 863 1.32 892 1.46 920 1.59 947 1.73 973 1.87 998 2.02 1023 2.17 — —
2100 819 1.21 850 1.33 880 1.46 909 1.59 936 1.72 963 1.86 989 2.00 1014 2.15 1039 2.30 — —
2400 839 1.34 868 1.48 898 1.61 926 1.75 953 1.89 980 2.04 1006 2.18 1032 2.34 — — — —
2-HP Standard Motor & Low
Static Drive Accessory Kit (2)
2-HP Standard Motor & Drive