Filter
Top Products
VBStar
VBrick MPEG-2 Appliance Admin Guide 113
FTP Server 1–8
Configuration: FTP File Transfer > Transfers
You can separately setup and use eight servers for FTP File Transfer. Enter the server
parameters in the Configuration: FTP File Transfer > Servers screen of IWS.
Name Ftpserver1 through Ftpserver8.
Type VBrick or Non-VBrick Appliance.
• VBrick Appliance – When sending to a VBrick appliance, the
serving VBrick must select the D: directory. The configuration of
VBrick Appliance automatically adds D: to the path name or to
any other configured folder or as part of the Directory entry. If no
folder is specified, all files will be transferred to the D: directory.
Additionally, subfolders may be specified.
• Non-VBrick Appliance – A non-VBrick appliance setting allows a
destination server to select its own path name, based on account
user name and password. In this case, the Directory setting may be
used to specify any sub-folder on the server.
DNS Name/IP The DNS server name or IP address for the FTP server. It accepts up
to 20 characters. The Host Name/IP must be a DNS Host Name.
User Name The FTP server user's account name.
Password The password required to access the FTP server. Optional entry.
Accepts up to 20 characters. The FTP User Name and Password must
be set up properly on the remote FTP server. If they are not entered
the same as what is set up on the server, the VBrick will be unable to
connect and perform the transfer.
Account The account name required to access the FTP server. Optional entry.
Directory This object allows a manager to switch to a different directory within
the FTP server after login. Optional entry. Accepts up to 64
characters. Anonymous FTP is not supported.