Filter
Top Products
20 © 2007 VBrick Systems, Inc.
Configuration: Decoder > Network
These parameters are decoder level IP parameters that instruct the decoder which IP stream
to decode on TV monitors.
Right Gain Used to adjust volume. Default = 0.
Configure PID MPEG-2 transmits its data in packets of 188 bytes each. At the start
of each packet is a packet identifier (or PID) identifies the data stream
associated with that packet. Because the MPEG-2 data stream might
contain multiple audio programs, the decoder has to choose a
particular audio channel to play. The PID selection provides that
feature. If the user chooses the automatic PID option, the first audio
PID detected will be used to select the audio channel.
Actual PID Actual PID being played. This read-only parameter is of interest when
the user selects automatic. A value of 8191 indicates the PID has not
yet been established.
Receive Enable Controls whether the decoder receives the video from the network.