VBrick Systems VB6000 Security Camera User Manual


 
64 © 2007 VBrick Systems, Inc.
General
COM1/COM2
Passthrough
Operational State
The current operational state of COM1/COM2 serial Passthrough
port. There will be a conflict if the slot selected through the
Passthrough Destination parameter has neither an encoder nor a
decoder present; or has an encoder with a multicast destination; or has
an encoder with no configured destination. The possible values are:
•Disabled
Enabled Active
Enabled Conflict No Enc Or Dest
Enabled Conflict Enc Multi Dest
Enabled Conflict Enc No Dest
Enabled Internal Error
Enabled Rejected
No Dedicated IP Addr
Conferencing State This setting indicates the unicast call state of the encoder.
Free – Available for a conference.
Busy – The VBrick is currently engaged in a conference.
Disabled – The conference feature has been disabled.
Unknown – The VBrick is in a transition state.
Active RFC-SAP
Count
This is the number of SAP sessions the appliance is currently listening
to for the purpose of RFC 2974-compliant SAP timing. This field
displays values when SAP timing is configured for RFC 2974 mode.
Network Port
Status
The status of the Ethernet network interface:
Link OK or No Link.
Network Port
Speed
The speed of transmission for the Ethernet network interface:
10Mbit
or
100Mbit.