Filter
Top Products
Supported Controllers
The following AD-UTC controllers are compatible with SpeedDome Ultra VII:
Controller Presets Patterns Quick Set Menu
ADCC0200 96 3 Yes
ADCC0300 96 3 Yes
This list of controllers is complete as of the time of publication. Other controllers may be supported.
Contact your Sales Representative for current information.
Performance Notes
The following considerations should be made when using the SpeedDome Ultra VII Day/Night
camera dome in the AD-UTC environment.
Address Setting
The SpeedDome Ultra VII camera dome must be set to address 891 to operate in the AD-UTC
environment. When the dome initializes or resets, the address and protocol information (UTC_T)
appear on-screen.
Accessing the Quick Set Menu
The Quick Set Menu provides easy access to certain SpeedDome Ultra VII Day/Night functions from
the keyboard. Two pages of settings are available. To access the Quick Set menu, select the dome,
and press
(Quick Set button).
Figure E-1: Quick Set Menu
0 TOGGLE QUICK SET MENU
1 DOME CONFIG MENU
2 AUTO IRIS/AUTO FOCUS
3 FLIP
4 PEEL PATTERN
10 NIGHT MODE
11 DAY MODE
12 AUTO DAY/NIGHT MODE
13 WDR ON
14 WDR OFF
FOCUS FAR = next page
15 SMOOTH SCAN
16 STEPPED SCAN
17 RANDOM SCAN
20 DOME INFORMATION
FOCUS NEAR = previous page
Enter a number and press
to use a quick set function. Press Focus Far or Focus Near to scroll
between pages. The following table describes the options.
E–4 SpeedDome Ultra VII Day/Night Operator's Manual