Filter
Top Products
Quick Set Command Description
0+Quick Set
Toggles between displaying and hiding the quick set menu.
1+ Quick Set
Displays the SpeedDome Ultra configuration menu. Refer to the
dome manual for information about the available settings.
2+ Quick Set
Resumes Auto Focus/Auto Iris mode.
3+ Quick Set
Rotates the SpeedDome 180° from its current pointing direction.
This is the same as pressing the
Flip button on controllers with
that feature.
4+ Quick Set
Runs the default Apple Peel Pattern continuously.
10+ Quick Set
Sets the dome IR mode setting to ON. The dome switches to full-
time black-and-white (B/W) mode.
11+ Quick Set
Sets the dome IR mode setting to OFF. The dome switches to full-
time color mode.
12+ Quick Set
Resumes the most recently selected automatic IR mode setting.
• Auto High: B/W mode activates ~30 lux.
• Auto Mid: B/W mode activates ~3 lux.
• Auto Low: B/W mode activates ~ .5 lux
13+ Quick Set
Enables Wide Dynamic Range (WDR). Use this setting when both
bright and low light areas need to be viewed simultaneously.
14+ Quick Set
Disables Wide Dynamic Range (WDR). Use this setting when the
light level is constant or changes in lighting conditions are gradual.
15+ Quick Set
Initiates a smooth scan between the left and right scan limits,
starting at the left scan limit. If no scan limits have been set,
initiates a smooth 360° clockwise rotation around the dome axis
using the current tilt, zoom and focus settings.
16+ Quick Set
Initiates a scan between the left and right scan limits pausing
briefly every 10° (at 1x zoom), starting at the left scan limit. When
the right scan limit is reached, the scan is reversed. If no scan
limits have been set, initiates a clockwise rotation around the dome
axis pausing briefly every 10° (at 1x zoom) for 3 seconds using the
current tilt, zoom and focus settings.
17+ Quick Set
Initiates a scan between the left and right scan limits pausing
randomly between the limits. If no scan limits have been set,
initiates a clockwise or counter-clockwise rotation around the
dome axis using the current tilt, zoom and focus settings. The
dome pauses randomly as it rotates around the axis.
20+ Quick Set
Displays the Dome Information screen available through the dome
configuration menu.
Refer to your controller instructions to determine if the Quick Set Menu is supported.
1–6 SpeedDome Ultra VII Day/Night Operator's Manual