Filter
Top Products
51
AXIS 233D - System Options
If your mail server requires authentication, check the box for Use authentication to log in
to this server and enter the necessary information. Several different methods of
authentication are available. For more information, please see the online help
.
SNMP
The Simple Network Management Protocol (SNMP) allows remote management of network
devices. Depending on the level of security required, select the version of SNMP to use. The
three levels of security are:
• SNMP V1 - includes no security.
• SNMP V2c - uses very simple security. The community name can be specified as a pass-
word for read or read/write access to all supported SNMP objects. The community is the
group of network devices using SNMP.
• SNMP V3 - provides encryption and secure passwords. HTTPS must be enabled.
UPnP™
The camera includes support for UPnP™, which is enabled by default. If also enabled on
your computer, the camera is automatically detected and a new icon added to “My
Network Places” (Windows XP/ME) or to a corresponding location.
Note: UPnP must also be enabled on your Windows XP or ME computer. To do this, open the Control Panel from
the Start Menu and select Add/Remove Programs. Select Add/Remove Windows Components and open
the Networking Services section. Click Details and then select UPnP as the service to add.
RTP / MPEG-4
Set port numbers and IP addresses for the video and audio streams. The port range is the
range of ports from which audio and video ports are selected. For multicast streams, only
certain port numbers and IP addresses should be used. The Time to live value tells the
network router when to discard IP packets what have not been delivered. For more
information, please see the online help
.
Bonjour
The AXIS 233D includes support for Bonjour. When enabled the camera is automatically
detected by operating systems and clients that support Bonjour. Enter a descriptive name
for the camera in the Friendly name field. The friendly name will be displayed in operating
systems supporting Bonjour.
Ports & devices
The AXIS 233D supports 4 input and 4 output ports for external equipment. Each port can
be given a descriptive name and its Normal state can be set to Open circuit or Grounded
circuit.
A port is inactive as long as its Normal state equals its Current state. The port is active
when the Current state differs from the Normal state.