Filter
Top Products
34 en | Configuration DINION capture 5000 IP
| 1.0 | 2012.01 Installation Manual Bosch Security Systems, Inc.
4.2.1 Pre-Defined Modes
There are six operating modes settings to make configuration
easier. Normal and FullSun modes are pre-programmed to work
with Automatic Mode Switching. Any one of the six modes can
be selected as the "switch-to" mode in Automatic Mode
Switching, refer to Section 8.7.1 Alarm input. The modes are
defined as follows:
1. Normal (Mode 1)
Default installation mode to provide stable pictures over a
24-hour period. These settings are optimized for out-of-
the-box installation.
2. FullSun (Mode 2)
Reduced gain to provide properly exposed image during
bright conditions.
3. Mode 3
Default settings.
4. Mode 4
Default settings.
5. Mode 5
Default settings.
6. Mode 6
Default settings.