Filter
Top Products
64 en | Advanced Mode DINION capture 5000 IP
| 1.0 | 2012.01 Installation Manual Bosch Security Systems, Inc.
8.4 Camera
8.4.1 Mode
Pre-defined modes
The camera has six operating modes that can be selected in the
Mode menu. Normal and FullSun modes have been pre-
programmed to work with Automatic Mode Switching. Any one
of the six modes can be selected as the "switch-to" mode in
Automatic Mode Switching, refer to Section 8.7.1 Alarm input,
page 103.
The modes are defined as follows:
1. Normal (Mode 1)
Default installation mode to provide stable pictures over a
24-hour period. These settings are optimized for out-of-
the-box installation.
2. FullSun (Mode 2)
Reduced gain to properly expose the image during bright
conditions.
3. Mode 3
Default settings.
4. Mode 4
Default settings.
Camera
> Picture Settings
>Mode
>ALC
> Shutter/AGC
>Enhance
>Encoder Profile
>Encoder Streams
> Privacy Masks
>Audio
> Installer Menu