DINION capture 5000 IP Configuration | en 35
Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01
4.2.2 Lens Wizard submenu
NOTICE!
Lens is factory calibrated and does not require any
adjustments.
Item Selection Description
Lens type Auto,
Manual, DC-
iris, Video
Auto: automatically selects the type of
lens.
Manual, DC-iris, Video modes: select
the matching lens type to force the
camera to the correct lens mode.
Detected Shows the type of lens detected when
auto lens detection is used.
Set Backfocus
now
Select to fully open the iris. Follow the
instructions below for setting the
backfocus for your particular lens type.
After focusing the object of interest
remains in focus under bright and low
light conditions.
Set LVL Only for video-iris lenses.
Adjust the level control on the lens to
center the level detector indicator (see
below).
EXIT Returns to Install menu.