Filter
Top Products
68 en | Advanced Mode DINION capture 5000 IP
| 1.0 | 2012.01 Installation Manual Bosch Security Systems, Inc.
Note:
If Sensitivity up is active, some noise or spots may appear in the
picture. This is normal camera behavior. Sensitivity up may
cause some motion blur on moving objects.
Gain
AGC - the camera automatically sets the gain to the lowest
possible value needed to maintain a good picture.
Fixed - sets Fixed gain value. For best performance, Fixed gain
is recommended.
Maximum gain / Fixed gain
Selects the maximum value the gain can have during AGC
operation (0 to 30 dB).
Selects the gain setting for Fixed gain operation (0 is no gain).
Increase gain if license plate image appears dark and decrease
gain if plate appears bright.
Actual gain
Displays the actual AGC value from the camera to help compare
gain level with lighting levels and picture performance.
8.4.4 Enhance
Dynamic engine
– Off: turns off all automatic scene detail and enhancements
(recommended setting).
– XF Dynamic: extra internal processing is enabled for low-
light applications (traffic, etc.).
– 2X Dynamic: 2X Dynamic adds dual sensor exposure to the
XF Dynamic features. In harsh lighting conditions pixels
from each exposure are mixed to give a more detailed
image (use 2X Dynamic when SmartBLC is not required).
– Smart BLC: BLC window and weighting factor are
automatically defined. Camera dynamically adjusts these
NOTICE!
The Enhance settings are factory set to work optimally for
capturing license plates, only an experienced user should
change these settings. Use discretion when changing settings.